miscibility
英
美 [ˌmɪsɪˈbɪlɪti]
n. （溶）混性；可混性；掺混性
双语例句
- First contact miscibility is found when the original reservoir fluid and the injection gas are miscible.
当原始油藏流体与注入气混合时会出现一次接触混相。 - Testing methods for wood adhesives and their resins& Method for determination of miscibility with water
GB/T14074.6-1993木材胶粘剂及其树脂检验方法水混和性测定法 - The Research of Miscibility of Micro/ Nano-crystal Cellulose and Polysulphone Blend System
微纳纤维素与聚砜共混体系相容性的研究 - Organic chemical products for industrial use& Standard test method for water miscibility
GB/T6324.1-1986有机化工产品水溶性试验方法 - Laboratory Study on the Miscibility of Cementing Liquids Flowing in Casing String
固井液体在套管内流动时的互混规律实验研究 - The miscibility of these copolymers with phenoxy resin is studied.
用溶液成膜法研究了这类共聚物与酚氧树脂的共混相容性。 - Miscibility of HFC refrigerant and mineral nano-refrigeration oil
矿物基纳米冷冻机油与HFC制冷剂的相溶性 - After some time, miscibility may be achieved between the ol and the injection gas.
一段时间后，在油和气之间出现混相。 - With a vaporizing gas drive, miscibility is achieved at some distance from the injection well. Development of valve device for injection-production integrated technology of heavy oil thermal recovery slim holes
在蒸汽驱中，混相在距注井一定距离出现。稠油热采井注采一体化配套开关装置 - Experimental Study on Miscibility of R134a/ R600a Refrigerant and Mineral Oil Mixture
混合制冷剂R134a/R600a与矿物油互溶性的实验研究 - The advertent problems and the tendency for development of organic sulfur chemicals production utilizing H 2S were discussed. Organic chemical products for industrial use& Standard test method for water miscibility
讨论了利用硫化氢开发有机硫化工产品中应注意的问题和发展趋势。GB/T6324.1-1986有机化工产品水溶性试验方法 - This allows the particle morphology to be controlled and prevents pronounced interpenetration of the different layers despite their miscibility.
这使得粒子的形态可控，并且避免了本来很容易互溶的层间的互相渗透。 - Prediction of co_2 minimum miscibility pressure for Daqing Petroleum
大庆油田二氧化碳驱油最小混相压力预测 - Study on Miscibility of PVDF Blends and Formation Mechanism of PVDF Blend Membranes
聚偏氟乙烯共混相容性及成膜机理研究 - The baby can stay in your room for a while. After some time, miscibility may be achieved between the ol and the injection gas.
可以住在你们房间一段时间。一段时间后，在油和气之间出现混相。 - With the increasing content of intermediate molecular weight components in the gas phase, miscibility may be achieved even though this was not possible with the original injection gas.
随着中等分子量组分在气相中的增加，混相就会发生，尽管这对原始注入气来说是不可能的。 - The method of solubility parameter was used to predict miscibility of polymer blends.
用三维溶解度参数方法预测聚合物共混物的相容性。 - Study on Poly blends Miscibility by Viscometry
用粘度法研究共混聚合物的相溶性 - The miscibility of the system become worse when the polymerization degree of polystyrene has been increased.
随着聚苯乙烯聚合度增大，体系相容性变差； - In this paper, the miscibility of soluble starch and PVA, the effect of polymerization degree and alcoholysis degree of PVA on separation speed of system and the relation of mixing ratio of the mixed system were investigated.
本文研究了可溶性淀粉与PVA的混溶性，探讨了可溶性淀粉与PVA的比例，PVA的聚合度和醇解度对分离速度的影响及混合体系的混合比和机械强度的关系。 - The miscibility and the storage stability of ethanol-diesel fuel in low and ambient temperatures are investigated.
介绍了对乙醇柴油的相溶性、低温稳定性、自然储存稳定性进行的研究工作。 - Ultrasonic attenuation can characterize the miscibility and phase morphologies of polymer blends.
超声衰减可表征聚合物共混物的相容性和相形态结构。 - Miscibility of ethanol-diesel fuels
乙醇和柴油的相容性研究 - A feasibility study on miscibility of higher alcohols with 70~# gasoline was carried out.
对低碳燃料醇与70~汽油的掺合性进行可行性研究。 - Due to the plastication and interpenetration, SBS with mobility and miscibility were improved as a hot-melt adhesive.
通过增塑和互穿，把具有流动性和可混性的SBS改性成了热熔胶粘剂。 - Miscibility of composites are studied by DSC, FTIR, POM and SEM.
用DSC、FTIR、POM和SEM对复合材料的相容性进行了综合研究。 - The miscibility of CPP with alkyd resin in the specified mixing ratios has been studied by FTIR spectra.
利用FTIR红外光谱法对氯化聚丙烯与短油度醇酸树脂共混物的相容性进行了研究，并用涂膜光泽度进行对比。 - The miscibility of the polymer blends PVC and TPU was discussed.
研究了PVC与TPU的相容性； - The miscibility of PVDF and PS was studied.
研究了PVDF与PS的不同溶混性。 - Miscibility and phase-separation are two important issues for multi-component polymers, which directly affect their morphology and structure.
由于直接影响该类高分子共混体系的形态和结构，进而影响所制备材料的性能，相容性和相分离一直被认为是多组分高分子研究领域的中心课题。