microsegregation
英
美
n. 显微偏析
双语例句
- Microsegregation of solute elements in solidifying mushy zone of steel and its effect on longitudinal surface cracks of continuous casting strand
钢凝固两相区溶质元素的微观偏析及其对连铸坯表面纵裂纹的影响 - Phase-field Method of Dendrite Growth and Microsegregation during Solidification
凝固过程枝晶生长与微观偏析的相场法模拟 - The microstructure characteristics and microsegregation of DD2 single crystal have been studied under ultra-high temperature gradient and rapid solidification conditions by laser rapid remelting.
利用激光快速熔凝技术对DD2单晶合金在超高温度梯度和快速凝固条件下的组织形态和元素的微观偏析行为进行了研究。 - These methods provide a base for numerical simulation on microsegregation.
这些方法为进行显微偏析数值模拟的研究提供了基础。 - Thermo-Calc linked computations of solidification paths of ternary alloys using an extended unified microsegregation model
基于微观偏析统一模型及Thermo-Calc的三元合金凝固路径耦合计算 - Formation of banding is related to microsegregation of manganese in the ingot and hot band;
带状组织与锰的显微偏析等因素有关。 - In this paper, effects of new grain refiners on dendrite structures, microsegregation and precipitated phases of cast superalloy K4169 have been studied.
研究了新型晶粒细化剂对K4169高温合金枝晶组织、元素显微偏析和合金相的影响。 - Microsegregation Behaviors of Alloy Elements and their Effects on the Formation of Banded Structure in Pinion Steels
齿轮钢中合金元素的偏析行为及带状组织抑制措施探讨 - Microstructural characteristics and microsegregation in weld metal weld-ed by laser beam are not only to related to alloys themselves, but are also affected by weldingconditions;
铝合金激光焊接焊缝金属微观组织特征及微观偏析不仅与合金本身有关系，而且焊接条件对其有很大影响； - Development Status of Numerical Simulation for Microsegregation Prediction during Solidification
凝固过程显微偏析预测数值模拟研究的发展现状 - Simulation Study on Solidification Microsegregation in Fiber Reinforced Aluminum Matrix Composites
纤维增强铝基复合材料凝固偏析模拟研究 - Study on a mathematical model of microsegregation in continuously cast slab
连铸坯中微观偏析的模型研究 - The microsegregation of each element decreased with increasing cooling rate.
各元素显微偏析程度随冷却速率增大而减小。 - EM Study of the Microstructure and Microsegregation of Austenitic Stainless Steel Weldments
奥氏体不锈钢焊缝组织和偏析的电镜研究 - Application of a New Model for Latent Heat Treatment to Simulation on Microsegregation
一种新型潜热处理模型显微偏析数值模拟的应用 - Macro and micro models are coupled with each other by latent heat treatment in simulation on microsegregation.
在显微偏析数值模拟中，宏/微观模型通过潜热处理相互耦合。 - The Microsegregation Mathematical Model for Binary Alloy Based on Coarsening and Back-diffusion
基于枝晶粗化和反向扩散的二元合金微观偏析数学模型 - Simulation on the Microsegregation During Strip Casting Process
薄带铸轧过程中微观偏析的模拟 - Study on Semi-analytic Microsegregation Mathematical Model for Binaryeutectic/ Peritectic Alloy System
二元共晶/包晶合金系微观偏析半解析数学模型的研究 - The microsegregation level in composites can be calculated in different solidification conditions with the predicting formula.
通过偏析模型计算可预测不同凝固条件下复合材料中偏析情况。 - Effect of Cooling Rate on Solidification Microsegregation of Fiber Reinforced Aluminum Alloy Composite
凝固冷却速度对短纤维增强铝合金复合材料基体成分偏析的影响 - The simulation indicates that solid-state diffusion is controlled mainly by the solute diffusing velocity but not the local solidification time for Al-Cu system studied, and the microsegregation parameters are affected not only by local solidification time but also by solidification path.
结果表明，对于AlCu合金，固相扩散主要由溶质扩散速率控制，而非局部凝固时间。显微偏析参数不仅取决于局部凝固时间，还要考虑凝固路径的影响。 - Effect of trace element on the microsegregation in cr-ni-mn-n austenitic steels
微量元素对Cr-Ni-Mn-N奥氏体抗氢钢微观凝固偏析的影响 - The primary solidification structure, which directly influences the grain morphologies, macrosegregation and microsegregation and the formation of solidification crack, have crucial effect on the mechanical properties of the joints.
焊缝的一次组织，直接影响晶粒形态、宏观及微观偏析程度以及凝固裂纹等缺陷的形成，而这些又对焊接接头的力学性能起着决定性的作用。 - The relation between solid fraction and temperature during solidification is calculated by a microsegregation model in mushy zone.
并使用多组元合金的固相分数计算模型，计算得出了固液两相区固相分数与温度之间的关系。 - Besides, the nucleation and growth model of multi-grain is builded by introducing orientation field, the the nucleation and growth of multi-grain is calculated under different conditions. Multi-grain hit, crystal grain degree and microsegregation of multi-grain are talked about.
此外，通过引入取向场建立适用于多晶粒形核与生长模型，计算不同条件下Al-Cu合金多晶粒的形核与长大，研究了多晶粒生长的晶粒碰撞、晶粒度和微观偏析等。 - Microsegregation is a prevalent phenomenon in the solidification process. The research on microsegregation is very important to understand the solidification behavior and predicate the solidification structure. Most of the engineering alloys are multicomponent and multiphase.
微观偏析是合金凝固过程中的常见现象，研究该现象对于认识合金的凝固行为、进行凝固组织的预测具有重要意义。