mfr.
英
美
网络 制造者,制造厂,厂商
双语例句
- Five factors that H2quantity input, isotactic degree, contaminations in raw material, reaction temperature so on critically affect the MFR of polypropylene.
H2的加入量、等规度、聚合反应密度、原料中杂质、反应温度等五方面因素对聚丙烯熔体流动速率具有重要影响。 - The melt flow rate ( MFR) impacting to crystallinity and properties of polypropylene ( PP) was studied.
研究了聚丙烯（PP）熔体流动速率（MFR）对结晶度及性能影响。 - The size of the connecting flange on drum will be provided by pump MFR.
连接法兰上鼓的大小，将提供泵的MFR。 - The results showed that in the same MFR, CR-PP has higher impact strength and HM-PP has higher elongation.
研究结果表明：相同熔体流动速率的CR-PP与氢调法PP比较，CR-PP的冲击强度高，氢调法PP的断裂伸长率高。 - Nonhalogenated. 7.0 MFR, for thicker sections without sinks.
非卤化。7.0熔体流动，为较厚的路段没有汇。 - The results show that: the kind of PE influences the graft rate and MFR of the product directly, the sequence of grafting ability is LDPE> LLDPE> HDPE;
实验结果表明：产物的接枝率和熔体流动速率（MFR）变化与聚乙烯的种类有直接关系，接枝性能从优到差的顺序为：LDPE>LLDPE>HDPE； - Joshua Shapiro, chief US economist at MFR, argued that exports would start to receive a boost from better economic conditions abroad and that the benefits from weaker imports would fade in the coming months.
mfr首席美国经济学家乔舒亚夏皮罗（joshuashapiro）认为，未来几个月，海外经济环境好转将开始提振美国的出口，而进口走弱带来的好处将逐渐消退。 - The effects of stabilized agent, MFR and melt temperature on degrading behavior were discussed.
对助剂量、熔体温度等工艺条件对降解行为的影响进行了讨论。 - The influences of reaction temperature and the raw materials during the production on MFR and lamination of coating grade polypropylene were analyzed.
本文分析了在生产过程中，反应温度和原料对高熔体聚丙烯产品指数、剥离强度的影响。 - Quatative relation formula is set up and MFR-component relation graph of PE mixture is also drafted.
建立了定量关系式，并绘制了PE混合体系的MFR与组成关系图。 - With most businesses looking to stabilise or modestly boost inventories, underlying demand for imports has picked up substantially, said Joshua Shapiro, chief US economist at MFR.
由于大多数企业正试图稳定或小幅增加库存，相关的进口需求已大幅回升，MFR首席美国经济学家乔舒亚夏皮罗（JoshuaShapiro）说。 - Change Analyst Changes, Items, Manufactures, Mfr. Parts, File Folders Create items and changes, and mange the routing and release process of changes through workflows.
变更分析变更，项目，制造商，制造商零件，文件夹，创建项目和更改，使用工作流管理流程和发布过程。 - In this paper, influences of filling tiny conductive powder into PP with various ratio on the Rv, MFR, Tm, tensile strength and elongation at break are studied.
文章研究了在聚丙烯中添加不同配比的导电微细粉末对其电阻率、熔点、熔体流动速率、拉伸强度和断裂伸长率等性能的影响。 - By using these algorithms, the network performance of different type of MFR architectures ( bidirectional and unidirectional) employing various routing schemes ( wavelength path and virtual wavelength path) are analyzed.
利用所提出的算法，我们定量分析了采用不同路由方案（波长通道和虚波长通道）的几种MFR结构（单向和双向）的网络性能。 - The influence of MFR of PP and mixing technology on the properties of the special material is discussed.
探讨了PP的MFR，以及挤出共混工艺对专用料性能的影响。 - When the mass fraction of nano-meter CaCO_3 was 4%, the MFR was the maximum.
当nano-CaCO3的质量分数为4%时，MFR出现最大值。 - The effects of the agent system on the modification were investigated by testing melt-strength, melt viscosity, the changes of melt flow rate ( MFR) and gel content.
通过熔体强度、熔体黏度测试和熔体流动速率（MFR）、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。 - PP-g-MA grafting degree and melt flow rate become high with DCP content increasing.
增加DCP用量会使产品的G和熔体流动速率（MFR）升高。 - In this paper the effects of various flame retardants, inorganic fillers and PP resin with different MFR on the fire retardance of the PP were studied by means of testing oxygen index and vertical flammability, and their mechanism was also analyzed.
本文通过氧指数、垂直燃烧性能的测试研究了不同阻燃剂、不同MFR的PP及无机填料对PP阻燃性能的影响情况，并分析了可能的机理。 - Degraded products having super high melt flow rate ( MFR) from polypropylene ( PP) were prepared via chemical degradation of isotactic PP with peroxide under action of shear force and at comparatively low temperature.
在剪切力作用和较低温度下，利用过氧化物对等规聚丙烯（PP）化学降解，得到了具有超高熔体流动速率（MFR）的PP降解产品。 - By testing the MFR of silane grafted PE with different preservation time, and the surface condition and the gel content of the silane grafted extrudates with different retention time in extruder.
测试不同储存时间下的硅烷接枝聚乙烯的熔体流动速率和硅烷交联聚乙烯电缆料在挤出机中停留不同时间后挤出物的表面状况、凝胶含量等。 - The MFR decreasing with increasing of molecular weight;
一般，随着SDS相对分子质量增大，熔体流动速率减小； - The results of rheological behavior testing and melt flow rate ( MFR) show that PP's rheological performance is improved effectively by graft-modification.
流变性能和熔体流动速率（MFR）测定表明，接枝反应有效地改善了PP流变性能。 - The more uniform, the higher the conductivity, and the particle diameter and MFR of PP had influences on the electrical conductivity and gas barrier property, too, but not obvious.
PP与石墨颗粒混合的均匀性对复合板的导电性影响较大，混合均匀则导电率高；PP粒径、MFR等亦可对复合板的导电和阻气性能产生影响，但程度较小。 - According to the high molecular theory, the molecular weight and molecular weight distribution can be showed by MFR.
借助高分子理论，指出以MFR值表征分子量及分布的可行性； - The irregular relationship between the melt flow rate ( MFR) and PBT resin content in the product compounding system during the production of PBT engineering plastics in BUSS kneader was researched and analyzed.
针对使用BUSS捏合机生产聚对苯二甲酸丁二酯（PBT）过程申出现的熔体流动速率（MFR）与产品配方体系中低分子量PBT树脂用量间的异常关系进行了研究和分析。 - Mfr's control in the production of PBT engineering plastics
PBT工程塑料生产中MFR的控制 - The effects of reaction temperature, monomer and comonomer concentration, initiator concentration and reaction time on the grafting degree, grafting efficiency and Melt Flow Rate ( MFR) of the resulted grafting copolymer were investigated respectively.
分别考察了反应温度、单体及共单体用量、引发剂用量和反应时间等对接枝率、接枝效率和接枝物熔体流动速率（MFR）的影响。 - The measurement of grafting degree, gel rate, melt flow rate, sag resistance and mechanical property, together with the analyzation of ATR-FTIR, DSC and TGA were carried out to characterize the structure and performance of PP-g-TAIC.
通过测定PP-g-TAIC的接枝率、凝胶率、熔体流动速率（MFR）、抗熔垂性能和力学性能，并利用ATR-FTIR、DSC、TGA等手段对PP-g-TAIC的结构和性能进行分析和表征。 - The join of fire retardant increase the melt flow rate ( MFR), make forming more convenient.
阻燃剂的加入提高了熔体流动速率（MFR），使成型加工比较方便。