metallography
英
美
n. 金相学；金属学
双语例句
- Foundation of Metallography Multimedia Teaching System and Development of Database
金相多媒体示教系统建立及数据库开发 - The varieties of the microstructure and the surface hardness of the titanium alloys sheet after the deformation are analyzed by the metallography microscope, SEM and the microsclerometer.
并利用金相显微镜、扫描电镜（SEM）和显微硬度计分析了冲击成形后试样组织结构和表层硬度的变化。 - The cracked longitudinal beam of a coach was analysed by means of metallography and SEM.
用金相、扫描电镜等分析方法，对开裂的客车纵梁进行了分析。 - Analysis of the crack has done with SED, metallography, composition analysis and EDS etc.
采用金相检验、扫描电镜、化学成分分析和能谱仪等方法对此批产品进行了分析。 - Metallography is the study of the microstructure of metals and alloys by means of the metallurgical microscope and the electron microscope.
金相学是用金相显微镜和电子显微镜对金属和合金的显微结构的研究。 - Introduction of Quantitative Metallography Method for Determination Distribution Uniformity of Particles
测定显微组织中第二相颗粒分布均匀性的定量金相法的介绍 - This category includes other facets of the subject, such as metallography, mechanical testing, and the heat treatment of metals.
这一分支还包括有关的其他一些内容，如金相学，力学试验及金属热处理等。 - The beam permeability and the absorbed line density of laser energy were determined by means of metallography.
提出了透光率、吸收透光能量线密度的概念。 - The Development of Quantitative Metallography Analysis System Based on Fractal Theory
基于分形理论的定量金相分析系统的开发 - The cause of fracture of a water supply valve used was analyzed by macrophoto, chemical composition analysis, metallography and mechanical performance.
针对使用中的自来水阀体断裂破坏，进行了宏观形貌、材质化学成分、金相组织、力学性能等失效分析工作。 - The wettability of the solder was measured by quantitative metallography.
用定量金相法测量钎焊料的铺展特性。 - Based on the system, the application of computer in metallography technology is discussed.
以该系统为基础，论述了计算机在金相技术中的应用。 - Inertia friction welding techniques is used to weld superalloy GH4169.Joint microstructure and property are analyzed by way of metallography, SEM EDS, and hardness analyzing methods.
采用惯性摩擦焊方法进行了GH4169高温合金的焊接，用金相显微镜、，扫描电镜下EDS分析和硬度试验等方法分析了接头组织和性能。 - The effect of flow forming on property of Ta Cu has been studied by use of metallography and microhardness.
结果表明：钽铜爆炸复合板具有足够高的强度，能承受施压加工时的较大塑性变形。 - The microstructure of hot-dip aluminum coat of deformed low-carbon steel containing RE has been analyzed by metallography microscopy and XRD, and the forming mechanism has also been discussed.
用金相显微镜及X射线衍射仪对形变含稀土低碳钢热浸镀铝的镀层微观组织进行了分析，并探讨了其形成机制。 - The samples of solder joints are inspected, and dissected by metallography.
对焊点样品进行了检测，并进行了金相解剖。 - The precipitation process was observed by optical metallography and JEOL JEM-2010 electron microscope ( TEM).
应用金相显微镜及JEOLJEM2010型高分辨电镜观察了沉淀析出过程。 - To adopt the metallography hardness method to study microstructure transformation of medial carbon steel 40 being heated and cooled.
采用金相-硬度法研究了中碳钢（40钢）在加热和冷却时的组织转变。 - The metallography microprobe method has been used to study the solidification process and segregation of a low segregated superalloy.
用金相探针法研究了一种低偏析高温合金的凝固。 - The complex modifying of RE-P on the hypereutectic Al-Si alloy was studied with SEM and quantitative metallography.
采用扫描电镜、定量金相分析等方法研究了RE-P复合变质对过共晶铝硅合金变质效果的影响； - Quantitative metallography and SEM were used for the analysis of microstructures of the alloy.
合金组织的微观分析采用了定量金相、SEM等方法。 - The zinc material in shapes of plate, strip and slug is analysed by x-ray diffraction and metallography.
对三种不同工艺生产的电池锌材（板、带、饼）进行了X光衍射和金相分析。 - Metallography detection has been widely applied in industrial manufacture and research.
在生产实践和科学研究中，金相检测方法得到了广泛的应用，在材料设计、分析加工、制造的过程中起着不可缺少的重要作用。 - The fractured springs were analyzed by means of SEM, metallography, chemical composition analysis and microhardness measurement.
采用扫描电镜、光镜、化学成分分析和显微硬度测试等方法对断裂件进行了分析。 - Examine through macroscopic, micro metallography person who analyze detection method analyze to their with X ray thing.
通过宏观、微观金相检验和X射线物相分析等检测方法对其进行了分析。 - The failure analysis of the hot extrusion die for bearing rings are made by means of metallography and hardness.
用金相、硬度等方法对轴承热挤压模具进行了失败分析，列举了模具各种典型失效形式； - The products were examined with SEM, chemical analysis, metallography, electron microprobe and X-ray diffraction techniques.
采用扫描电镜、化学分析、金相、电子探针及X射线衍射等传统方法对腐蚀产物进行了分析。