liquidus
英
美
网络 液相线; 液体的; 液相線; 液态线; 液相限
双语例句
- Experimental study of effect of phosphorous on liquidus temperature of peraluminous magmatic system
磷对过铝质岩浆液相线温度影响的实验研究 - Semi-solid slurry of Y112 alloy was cast by near liquidus semi-continuous ( NLSC).
采用近液相线半连续多模铸造法制备出Y112铝合金半固态坯料。 - Experimental study on determination of liquidus temperature of Aluminum electrolyte
铝电解质初晶温度测量方法的实验研究 - A mathematic model about the relationship between liquidus temperature and cryolite ratio was simulated.
根据分析结果拟合出该体系初晶温度与分子比数学模型。 - Rapid growth of mother dendrites in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.
在特定的熔点，以低于液相线的温度快速生成母晶枝，这是使熔融金属或复辉快速散热的结果。 - Fat liquidus relationship to the meat and the preservation of sex, modulation, rational, and taste.
脂肪的融点关系到肉的保存性，调理性，还有口感。 - The adiabatic heating induces the temperature of fracture surface layer to be higher than the liquidus temperature too.
计算表明，断口表面层绝热升温温度依然高于液相线温度。 - Metal is preheated in a furnace or crucible until is above the liquidus temperature in a suitable range ( we don't want the metal solidifying before the pour is complete).
金属在熔炉或坩埚中预热到高于液化温度的一个合适范围内（不希望金属在浇铸完成前凝固）。 - Liquidus temperature of actual aluminum electrolyte samples was measured directly.
直接测定了铝电解质实际样品的初晶温度。 - Low liquidus temperature enables low bath temperature. The current efficiency increases with the decreasing of bath temperature.
低初晶温度允许低电解温度，而降低电解温度可大大提高电流效率。 - The liquidus temperature, solidus temperature and crystal interval of Al-11.4% Cu alloy are determined by testing and analysing the resistance of Al-11.4% Cu alloy solidified under an alternating magnetic field.
通过测试和分析Al-11.4%Cu合金在交流磁场中凝固的电阻，确定了合金液相线和固相线温度以及结晶区间。 - The stress was put on the development of communication program and liquidus temperature searching program.
其中重点研究开发了通信程序和初晶点自动搜索程序。 - Research on mathematical models of liquidus temperature and conductivity of electrolyte in aluminium electrolysis
铝电解质初晶温度和电导率数学模型的研究 - The roles and characteristics of interaction energies in the equations of liquidus lines were analysed.
用规则溶液模型可以预测相图中的液相线，分析了液相线方程中分子间相互作用能ue的作用和物理意义。 - The casting and remelted microstructures of ZL201 alloy cast by liquidus semi-continuous casting ( LSC) were studied.
研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。 - In the liquidus nearby, the grains size becomes coarse with increasing of casting temperature.
在液相线附近，晶粒尺寸随着浇铸温度的降低而逐渐减小并呈球化的趋势。 - Liquidus and immiscibility temperatures in soda-lime-silica glasses were determined by petrographic microscope and TEM respectively.
本文分别采用溶胶凝胶法和常规法制备钠钙硅玻璃，液相温度和不混溶上限温度用光学显微镜和透射电镜进行测定。 - γ B is activity coefficient of components A, B at liquidus temperature.
γA、γB分别为组元A、B在液相线温度时的活度系数。 - From the experimental data, the pouring temperature, liquidus and solidus temperatures of the alloy are obtained, and the solidification range of the alloy is determined as 71 ℃.
测试了合金的浇注温度，液相线温度和固相线温度，得出合金的凝固温度区间为71℃。 - The microstructure evolution of ZL 111 by heat holding above the liquidus temperatures was investigated.
对ZL111铝合金在近液相线的温度保温后的铸态组织进行了研究。 - Bath temperature, liquidus temperature and cryolite Ratio are important parameters in Hall-Heroult for aluminum electrolysis.
电解温度、电解质初晶温度电解质分子比是铝电解过程的重要经济技术指标。 - Solidification sequence has been proposed with the help of DSC analysis and Mg-Zn-Al ternary liquidus projection phase diagram.
结合DSC分析结果和Mg-Zn-Al三元液相面投影图，给出了熔体凝固过程中发生的相变反应和凝固序列。 - Liquidus temperature is one of important parameters of production of aluminum electrolyze.
电解质初晶温度是铝电解生产过程中的一个重要参数，本文研究了直接测定铝电解质初晶温度的装置。 - It gained good non-dendritic microstructures that LSC was performed at a little high liquidus temperature and low casting velocity.
所以在略高于液相线温度保温，较低的铸造速度下进行半连续铸造能获得良好的非枝晶组织，并在此基础上分析了液相线半连续铸造条件下的形核及长大机理。 - There are structure transformation temperature intervals of Al and Si atom clusters above liquidus line of Al-Si alloy.
Al-Si合金在液相线以上存在铝、硅原子集团的结构转变温度区间。 - In addition, the liquidus projection and reaction scheme of this system are also constructed in the present work. ( 2) The isothermal section of the Mn-Ni-Si system at1000 ℃ is determined by means of XRD and SEM/ EDX.
此外，本工作还构筑了该体系的液相面投影图和希尔反应图。（2）采用XRD、SEM/EDX等实验手段，测定了Mn-Ni-Si体系1000℃等温截面。