lay-up

noun

1. 单手上篮
   a shot made with one hand from under or beside the basket
2. 打点（将球送到较容易击打的位置的一击）
   a shot made from a difficult position to a position that will allow an easier next shot

1. Budget cuts that forced the lay-up of several ships.
   预算削减使得几条船被搁置不用。
2. Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, RTM, filament winding and hand lay-up processed.
   并适用于拉挤成型、注射成型（RTM）、缠绕成型、手糊成型等玻璃钢成型工艺。
3. This product is used primarily for hand lay-up, pultrusion, RTM, and filament winding process, etc.
   玻璃纤维缝编短切毡主要用于手糊、拉挤、RTM和缠绕等玻璃钢成型工艺。
4. A new protection method was presented for lay-up generator set, which was fit for part as well as complete overhaul of thermal equipments in domestic power plant at the present.
   介绍了某电站热力设备停用保护采用的新型高温成膜缓蚀剂及其停用保护方法。
5. Trek's highest-performance carbon fiber, OCLV Red uses a significant percentage of high modulus carbon fiber arranged according to our most complex lay-up schedules.
   红使用高百分比的高模量碳纤维，根据我们最复杂的层叠程序进行制造。
6. Liang Ming broke through all obstacles to make a lay-up shot.
   梁明冲破一切障碍切入上篮。
7. Laurie: Don't forget my lay-up.
   萝莉：别忘了我的带球上篮喔。
8. Vincent Rainey of Colorado scores with a reverse lay-up.
   科罗拉多队的文森特。瑞内转身上篮得分。
9. As much as I love to sink a trick shot alone on a public court, nothing matches the adrenaline rush and communal feeling of joy that I experience when I make a lay-up for my team.
   公开比赛时，尽管我也很喜欢靠个人技术去破坏对手的假动作投球，但我为球队上篮得分时所获得的肾上腺的刺激和集体荣耀感却是无可比拟的。
10. Our company is a Foreign Enterprise ( America), mainly producing the fiberglass products: Such as Stone Deck, Hand Lay-up and Pultrusion.
    我公司是一家外商独资企业（国）主要生产玻璃钢制品如石材、糊制品、挤制品。
11. The machine frame can install various agricultural implements, the functions are multiple, the utilizing rate is high, and the lay-up period is short.
    这种机架可以安装多种农机具，功能多、利用率高、闲置期短。
12. Application of Pure Octadecylamine Method to Lay-up Protection of 9F Heat Recovery Steam Generator of Gas-steam Combined Cycle Generator Set
    纯十八胺法在燃气-蒸汽联合循环发电机组9F级余热锅炉停运保护中的应用
13. I learned how to shoot a lay-up, a foul shot, and a23-pointer.
    我学会了篮板球、罚球和23分球。
14. Tentative study on phenolic resin for hand lay-up process
    手糊成型用酚醛树脂及工艺的初步研究
15. The paper introduces the structure, lay-up, materials option, molding process and performance testing of carbon/ epoxy composite materials secondary mirror substrate.
    文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺，性能测试等内容。
16. It is used in the FRP products made by hand lay-up or RTM molding method.
    产品已在手糊成型和RTM成型的玻璃钢上得到了应用。
17. The choice of the matrix resin and the reinforcing material, and the structural design, the strength calculation and the technical demands of hand lay-up for CFRP packed tower are introduced.
    论述了基体树脂、增强材料的选择，GFRP塔的结构设计、强度计算和手糊成型、组装的工艺要求。
18. The structure design of cylindrical tank with hand lay-up process were introduced, the improved method of liner forming process were provided.
    本文介绍了手糊成型玻璃钢圆柱形容器的结构设计，并对内衬层成型工艺提出了改进方法。
19. The preparation and characteristics of the TM-36# gel coat resin for spray up and hand lay-up are introduced in this paper.
    本文介绍了TM-36手湖喷涂两用型胶衣树脂的研制及性能。
20. It was concluded that the interlaminar tensile strength of the composite is dominated by the bonding strength of the interface between fiber and matrix, not by lay-up orientation.
    结果表明：该复合材料层间拉伸强度较少受到铺层取向的影响，而由纤维与基体的界面结合强度所控制。
21. Various technical requirement and the quality control of technological process in FRP hand lay-up process were mentioned.
    本文介绍了在制造玻璃钢产品手糊成型中各种技术要求及工艺流程的质量控制。
22. Optimum design of lay-up ratio and axial compression property analysis for an integral composite skirt
    整体复合裙的铺层比优化设计与轴压性能分析
23. In this paper the laminating process of metal fiber/ resin matrix super-hybrid composite was systematically studied, including laminate lay-up and process. The best curing process parameters and heat treatment were discussed too.
    本文系统研究了金属纤维/树脂基超混杂复合材料层压成型工艺（即SHCM）的铺层设计和铺层工艺，探讨并确定了固化工艺和后固化处理参数，从而使材料具有优异的性能。
24. With same material and technics, bond strength of parallel lay-up is higher than upright lay-up.
    材料和工艺相同时，顺纹组坯时的胶合强度高于垂直纹理组坯时的胶合强度。
25. This article introduces structural design, technological process and application of hand lay-up GF phenolic plastics rectangle tank.
    本文介绍了手糊成型酚醛玻璃钢矩形贮槽的结构设计、成型工艺及应用情况。
26. In this paper, we indicateed some researches on the resin, curing agent, active additive and other materials suitable for phenolic hand lay-up process.
    本文对酚醛手糊成型的树脂及其合成方法、固化促进剂、活性助剂、辅助材料以及成型工艺做了初步的研究，并进行了讨论。
27. The paper introduces 3D-braid process, the property comparison of 3D-braid composites and traditional lay-up composites.
    文章阐述了三维编织工艺，并将三维编织复合材料的性能与传统铺层复合材料的性能作了比较。
28. The results indicate that fiber volume fraction, curing shrinkage, lay-up styles and cure temperature have significant influence on curing deformation.
    结果表明：纤维体积分数、固化收缩率、铺层方式和固化工艺温度都对复合材料固化变形有着显著的影响。
29. The processes of hand lay-up moulding FRP still is irreplaceable among of numerous FRP molding processes for itself technics feature of flexibility.
    玻璃钢手糊成型工艺有其自身的工艺灵活性特点，在众多的玻璃钢成型工艺中仍然具有不可替代的作用。
30. The study on wind turbine blade structure layer design is of important significance to improve safety and reliability of the blade. Firstly, lay-up design method of the composite wind turbine blade structure is studied in the paper.
    开展风电机组叶片结构铺层设计方面的研究对提高叶片的安全性、可靠性具有重要的意义。首先研究了复合材料风电机组叶片结构的铺层设计方法。

noun

1. a basketball shot made with one hand from a position under or beside the basket (and usually banked off the backboard)

   Synonym:    layup