laser-assisted
英 [ˈleɪzə(r) əˈsɪstɪd]
美 [ˈleɪzər əˈsɪstɪd]
网络 激光辅助的
双语例句
- The technique, called laser-assisted water condensation, could one day unlock the secrets of weather cycles and enable humans to decide where and when it rains.
这项名为激光助水凝结的技术有一天将揭开气象周期的秘密，并帮助人类决定下雨的事件和地点。 - Viability of Epithelial Cells and Cleavage of Corneal Basement after Alcohol Exposure during Laser-assisted Subepithelial Keratectomy Flap Preparation; The functional compensation in retina of interfere group was active, furthermore, there were not incrassation.
LASEK酒精浸润法角膜上皮瓣活性及基底膜分离的组织学定位研究干扰组大鼠视网膜组织中细胞功能代偿活跃，基底膜未见有增厚改变。 - Changes in Tear Film Stability and Corneal Sensitivity after Laser-assisted Subepithelial Keratectomy I thought he did Hamlet superbly.
LASEK后泪膜稳定性及角膜知觉的改变我觉得他扮演哈姆雷特一角很出色。 - The laser-assisted machining has less tool wear and can get a better surface quality.
刀具磨损和破损的程度较小，能获得较好的表面加工质量。 - The turning process of carbon-graphite M104 seal ring is focused, and the comparative experimental study on conventional machining and laser-assisted machining are performed.
针对碳石墨M104密封环的车削加工过程，进行了常规切削和激光辅助切削的对比实验研究； - Evaluate the effect of CO_2 laser-assisted uvulopalatopharyngoplasty for obstructive sleep apnea-hypopnea syndrome
CO2激光辅助悬雍垂腭咽成形术治疗阻塞性睡眠呼吸暂停低通气综合征的疗效评价 - Such a simplified dressed wave function is useful in the calculation of laser-assisted scattering, especially in the laser-assisted rearrangement collisions.
此波函数适用于计算激光辅助的散射过程，特别是重排过程。 - The temperature distribution in the cutting zone of laser-assisted machining is similar to conventional machining.
激光辅助切削的切削区温度分布与常规切削相近； - To perform high efficient turning of hydraulic carbon-graphite seal ring, the laser-assisted machining of the material of carbon-graphite seal ring is conducted using laser pre-heating.
为实现液压碳石墨密封环的高效车削加工的目的，采用激光辅助加工方法，进行了碳石墨密封环材料的激光辅助车削加工研究。 - Outcomes of intranasal endoscopic holmium laser-assisted dacryocystorhinostomy in treatment of chronic dacryocystitis
鼻内镜下钬激光泪囊鼻腔造孔术治疗慢性泪囊炎的疗效随访 - Hypertonic Saline-Assisted Laser-Assisted Subepithelial Keratectomy for the Correction of Moderate and Low Myopia; Effect of LASIK or LASEK on the higher order of wavefront aberration in patients with myopia
高渗盐水制作角膜上皮瓣的LASEK治疗中低度近视的相关研究准分子激光原位角膜磨镶术和准分子激光角膜上皮瓣下磨镶术对近视患者高阶像差的影响 - Experimental Study of Femtosecond Laser-Assisted Deep Lamellar Cut in Rabbit Corneas
飞秒激光辅助的兔眼角膜深板层切削的实验研究 - Objective To compare changes in corneal nerve fibers by confocal microscopy after laser-assisted in situ keratomileusis ( LASIK) and laser epithelial keratomileusis ( LASEK).
目的在共焦显微镜观察下比较激光原位角膜磨镶术（LASIK）和激光上皮瓣下角膜磨镶术（LASEK）术后角膜神经再生的变化。 - Impact of laser in situ keratomileusis and laser-assisted subepithelial keratomileusis on the recovery of central corneal perceptivity
准分子激光原位与上皮瓣下角膜磨镶术对角膜中央知觉恢复的影响 - Application of Laser-assisted in Situ Keratomileusis in Glaucoma Patients
激光原位角膜磨削术在青光眼患者中的应用 - Objective To compare the outcomes of powered-assisted septoplasty with CO_ 2 laser-assisted septoplasty.
目的介绍切割吸引器和CO2激光辅助的鼻中隔成形术，在局限性鼻中隔偏曲治疗中的应用及其疗效。 - Objective To observe and evaluate corneal topography guided laser-assisted in situ keratomileusis ( LASIK).
目的观察及评价角膜地形图引导的近视准分子激光原位角膜磨镶术（LASIK）。 - Laser-assisted Electron-atomic-hydrogen Free-free Transition
激光辅助的电子对氢原子的自由-自由跃迁 - Chemical beam epitaxy, atomic layer epitaxy, migration enhanced epitaxy, selective area epitaxy, laser-assisted epitaxy and low temperature Si epitaxy are new ultrathin epitaxial techniques developed based on molecular beam epitaxy and metallorganic chemical vapor deposition.
化学束外延、原子层外延、迁移增强外延、选择区域外延、激光辅助外延和低温Si外延等是在分子束外延和金属有机化学气相沉积基础上发展起来的几种新型超薄层外延技术。 - Clinical effect and esthetical evaluation of diode laser-assisted in tooth bleaching
半导体激光美白牙齿的临床效果及美学评价 - CONCLUSION The complications of the CO2 laser-assisted laryngeal microsurgery for laryngeal tumors may be caused by CO2 laser or suspended laryngoscope.
结论CO2激光喉手术须经支撑喉镜进行，故并发症可分为激光损伤造成的并发症和支撑喉镜造成的并发症。 - By comparing the observed results of the surface quality under different machining conditions, the mechanism of laser-assisted machining ceramics has been studied.
最后，结合工件表面质量的变化情况，深入分析了激光加热辅助切削中加工工艺参数对加工质量的影响机理。 - Laser-assisted Plasma-enhanced Chemical Vapor Deposition for Silicon Nitride Thin Film
CO2激光辅助等离子体激励式化学气相沉积非晶形低氢氮化硅薄膜 - Effects of different culture time and laser-assisted hatching on clinical outcome in frozen-thawed embryo transfer cycles
辅助孵化与培养时间对冻融胚胎移植结局的影响 - In this paper, the principle, method ana viability of using laser-assisted heating to improving the machinability for tough materials are described.
本文论述了利用激光辅助加热改善难加工材料切削性能的原理、方法，以及这种加工方式的可行性。 - The Swine Surgical Experimental Study of Laser-Assisted Liposuction
激光吸脂术的动物实验研究 - Objective: To determine whether laser-assisted immobilization of sperm damages sperm DNA.
目的：研究激光辅助制动精子是否引起精子核DNA损伤。 - Laser-assisted electron-He atom scattering Calculation of the differential cross section in a special situation
激光辅助电子-He原子散射&一种特殊情况下的微分截面的计算 - Femtosecond laser-assisted posterior lamellar keratoplasty: Initial studies of surgical technique in eye bank eyes
飞秒激光辅助后部板层角膜移植术：眼库保存眼手术方法的初步研究 - It takes advantages from MO and magnetic recording methods. The message writing is by laser-assisted thermal magnetic recording and message reading is by magnetic flux detection with high sensitive GMR sensors.
它汲取了磁光记录以及磁记录的优点，信号写入采用的是激光辅助加热方式，信号读出则是采用高灵敏度的巨磁阻磁头检测磁通方式来进行。