inconel
英
美
n. 铬镍铁合金（耐热，耐蚀合金）；因康镍合金；（镍80％，铬14％，铁6％）
双语例句
- Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy
钎焊温度对镍基合金真空钎焊接头组织及硬度的影响 - Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Solid Forming Inconel 718 Superalloy
热处理对激光立体成形Inconel718高温合金组织和力学性能的影响 - Effect of Solution Treatment on Microstructure and Mechanical Property of Inconel 690
固溶处理对Inconel690合金组织和力学性能的影响 - Dissolution and precipitation of carbide in hot-rolled Inconel alloy 690
热轧态Inconel690合金中碳化物的溶解和析出 - Precipitated Phase of Alloy Inconel 690 After Thermal Treatment
Inconel690合金TT处理后的析出相 - The study on the hot extrusion working parameters of inconel 690 based on processing maps
基于热加工图的inconel690合金挤压工艺参数研究 - Thermodynamic simulation calculation of precipitation phase in modified inconel 718 Ni-based alloy
改型In718镍基合金析出相的热力学模拟计算 - Microstructures and Mechanical Properties of a Modified Inconel 718 Alloy
一种改型Inconel718合金的组织与性能的研究 - Aerodynamic heating again defined its design requirements, and it was built of the nickel alloy Inconel X.
气动加热再次明确了设计要求&它由镍铬铁合金“因科镍X”制造。 - Grain growth model of Inconel 718 Alloy forged slab in reheating process prior to rough rolling
Inconel718合金方坯粗轧加热过程晶粒长大模型 - Drilling deep holes in stainless steels, materials of difficult machinability such as titanium and inconel.
可钻削不锈钢、钛合金以及因可耐尔合金等难加工材料中的深孔。 - Hot Deformation Constitutive Equation of Alloy Inconel 690
Inconel690合金热变形本构方程研究 - Investigations on Friction and Wear Behavior of High Speed Turning Nickel-based Alloy Inconel 718
镍基合金Inconel718高速车削摩擦磨损行为研究 - Effect of Cold Deformation on Structure and Mechanical Behavior of Inconel 690 Alloy
冷变形对Inconel690合金力学行为与组织的影响 - The recrystallization behavior and the variation in hardness of cold rolled Inconel 718 alloy have been investigated in the temperature range of 810~ 910 ℃ as a function of cold rolling reduction and annealing time.
研究了冷轧Inconel718合金的再结晶行为及退火过程中硬度的变化规律。 - The work hardening behavior of Inconel 718 at the room temperature is studied by quasi-tensile test.
采用准静态拉伸试验方法研究Inconel718合金的加工硬化特性。 - Inconel 690, a nickel-based superalloy, was nitrided by means of plasma nitriding.
对镍基超合金Inconel690进行了离子渗氮处理。 - Effect of Annealing Conditions on Hydrogen Embrittlement of Inconel 718
退火对Inconel718合金氢脆特性的影响 - Effect of Combined Addition of Phosphorus and Boron on Inconel 718 Alloy
复合添加磷和硼对Inconel718合金的影响 - Meanwhile the process and the measures with CO_2 gas shielded welding and Inconel series alloy flux-cored wire to weld the above mentioned material have been presented.
介绍了采用CO2气体保护焊和Inconel系合金药芯焊丝焊接上述异种材质的工艺方法和措施。 - The processing of superplastic forming ( SPF) and diffusion bonding ( DB) of Inconel 718 alloy for fabricating rocket engine parts is presented in this paper.
介绍了用于制造火箭发动机零件的因康镍（Inconel）718合金的超塑成形（SPF）和扩散连接DB）工艺。 - In order to improve plasticity and ductility of Inconel 718 alloy weld joint, it is necessary to develop nickel-based superalloy welding materials with good mechanical properties and weldability.
为了提高Inconel718合金焊接接头的塑、韧性，开发了具有良好力学性能和热加工性能的镍基高温合金焊接材料。 - Inconel alloy 690 and Inconel alloy 693 were chosen as the electrode materials in this study and their corrosion behaviors in iron phosphate glass melt containing low activity ( LAW) nuclear waste was explored.
选用合金Inconel690和693作为研究对象，着重研究了它们在铁磷酸盐玻璃熔体中的腐蚀行为。 - Phase Characterization and Microstructure Analysis of Inconel Alloy 783
In783合金的相组成和组织结构 - The effects of cast and heat treatment processes on microstructure and mechanical property of Inconel 718C were studied.
研究了铸造及热处理工艺对Inconel718C合金的显微组织及力学性能的影响。 - Effect of Boron and Sulfur on Inconel 718 Alloy
硼和硫对Inconel718合金性能的影响 - Additionally, the friction and wear performance of Inconel 718/ carbide tool are also researched.
同时研究了Inconel718与硬质合金刀具材料对偶时的摩擦磨损特性。 - Through high-speed dry milling technology, the surface quality of Inconel 718 is studied in this thesis.
本文通过高速干铣削加工技术精加工Inconel718，对其加工后的表面质量进行研究。
英英释义
noun
- a nickel-base alloy with chromium and iron