hydromechanics

n.  流体力学;水力学; 缩写词为HYDROM

化学



双语例句

  1. The Bernoulli equation in hydromechanics and its application to flowrate testing has been discussed in this paper.
    本文论述了流体力学中伯努利方程及其在流量测试中的应用。
  2. Rheological properties of full tailings slurry in pipeline transportation based on the hydromechanics theory
    基于流体力学理论的全尾砂浆管道输送流变性能
  3. Involves the project geology, the hydrology geology, Rock mechanics, mine pressure, hydromechanics, crag body water subject and so on multi-gates discipline theory and practice.
    涉及工程地质、水文地质、岩体力学、矿山压力、流体力学、岩体水力学等多门学科的理论和实践。
  4. Basic principles of hydromechanics applied, a formula to calculate the parameter of the distributing plate is deduced.
    应用流体力学基本原理,得出了形成稳定液位的分布板结构设计的计算公式。
  5. Hydromechanics Calculation for Micro Sphere UO_2 Fuel Producted by Sol-Gelation Method Experiment shows that with the increment of substituted spontaneous combustion gangue powder for cement, the water demand of gelled material system is increased gradually.
    溶胶凝胶法制造UO2燃料微球的流体力学计算试验结果表明,随着自燃煤矸石粉取代水泥量的增加,胶凝材料体系需水量逐渐增大。
  6. Study on the Hydromechanics of Solid Reactive Spray Tray
    立体催化精馏塔板流体力学性能的研究
  7. The paper studies acting force and movement law of the carrying electricity dust, and sets up hydromechanics equation of the air dust.
    阐述扩展式旋风静电除尘器的降尘机理,描述空气粉尘的荷电过程,研究荷电粉尘的受力和运动规律,建立气流粉尘的动力学方程。
  8. This paper analyses the error of the Vortex flowmeter for Gas using the method of hydromechanics. One engineering solution is given.
    文中以气体涡街流量计为例,从流体力学的角度分析了涡街流量计测量误差产生的原因,结合气体测量的特点,使用了一种工程化的解决方法。
  9. According to the basic principles of hydromechanics and the electrical network theory, a new method named network matrix approach is presented in this paper to calculate ventilation system.
    本文依据流体力学的基本原理和电路中网络理论提出一种新的通风系统计算方法&网络矩阵法。
  10. The research development of CTST is reviewed, including the study on hydromechanics, flow property of liquid phase on plate, mass transfer property and computer simulation technology etc.
    本文综述了立体传质塔板CTST的研究进展,包括流体力学性能研究、板上液相流动性能研究、传质性能研究、计算机模拟技术等。
  11. Hydromechanics theory concerning with water pumps is proposed.
    介绍了作者正在研制的水波泵目前所涉及到的流体力学理论。
  12. In this paper, ferrofluid seals for rotating shafts are analysed according to electromagnetism and hydromechanics.
    本文根据电磁学和流体力学对磁性流体密封进行了理论分析。
  13. Hence, its structure design and critical parameters are determined based on the theoretical analysis of thermodynamics and hydromechanics, and the design targets are also realized.
    为此,用热力学和流体力学理论分析并解决了水滤式油炸机结构设计及关键参数确定等的实际问题,实现了设计目标。
  14. The tension of liquid surface is studied in several industrial areas, such as flotation technology and liquid technology, and in the teaching of hydromechanics and other subjects.
    液体的表面张力,在工业上的浮选技术和液体输送技术;在教学中的流体力学等都要对它进行研究。
  15. A New development of Flow Measurement in Hydromechanics
    流体力学中流动测量技术的新发展
  16. In this paper, using the theory of traffic control and hydromechanics, the author improves the model of describing the change of traffic density. This paper provides better mathematic model to the further study of traffic control theory.
    本文利用交通控制理论和流体力学理论,改进了描述交通密度变化的模型,这为今后进一步研究交通控制理论提供了较好的数学模型。
  17. In order to overcome this weak link in the dregs thick liquid expulsion system, we have designed and made a simple wear-resisting bend, using hydromechanics knowledge, to solve this problem.
    为了克服渣浆输送系统中这一薄弱环节,运用流体力学中的伯奴利方程及其他知识而设计和制造的简易耐磨弯头解决了这一问题。
  18. The hydromechanics basis and selection of process design parameters for the shell& tube condensers are described, and the selection of condenser materials, heat transfer medium and routing is introduced.
    综述了管壳式冷凝器的流体力学基础和工艺设计参数的选择,介绍了冷凝器材质和换热介质及走向的选择;
  19. In the paper, hydromechanics theory was used to analyse the cause of formation of dynamic load.
    本文从流体力学角度出发,分析了液压动载荷形成的原因。
  20. Thermodynamics and the hydromechanics boundary condition are given. The boundary conditions of the model given is fairly accurate.
    给定了合理的热力学及流体力学边界条件。给出了较准确的应力模型边界条件。
  21. The basic pipeline pressure pulsation equations have been deduced in this paper on the basis of hydromechanics theory.
    本文依据流体力学的运动方程及连续方程,推导出充满液体管道中压力波动基本方程,据此,研究了管道开放端和封闭端压力波的通过和反射的解析算法。
  22. The mathematical model is set up on the basis of the governing equations of viscous hydromechanics.
    基于黏性流体力学基本方程,建立了流体流动和传热的数学模型;
  23. In order to understand the generating process, an hydromechanics analysis is given.
    为搞清气体团束的产生过程,进行了流体力学分析。
  24. Basic theory of hydromechanics related with PZT pump is expounded.
    阐述了与压电泵相关的流体力学的基本理论,并对无阀压电泵输出流量进行了定量分析;
  25. On the based of hydromechanics experiment, the principle of washing clothes is investigated.
    以流体力学实验为基础,对洗衣原理进行了分析与研究。
  26. Using the CFD method and hydromechanics analysis software FLUENT, I conducted the research and the analysis to the interior flow field of the columnar gas liquid separator.
    利用CFD方法,采用流体力学分析软件FLUENT对分离器内部流场进行了研究和分析。
  27. The measurement of gas-liquid two-phase flow is one of the difficult issues in hydromechanics research field.
    气液两相流场的测量是目前多相流体力学研究中的一个难点。
  28. The mathematical model of the urethra valve was built based on the theories of electromagnetics and hydromechanics. The model was used to analyze the characteristics of the urethra valve effected by different electromagnet current, air gap and so on.
    运用电磁学理论和流体力学理论,建立了尿道阀的数学模型,利用该模型仿真分析了电流和气隙等不同因素对尿道阀特性的影响。
  29. The water tunnel is the main hydromechanics fundamental research vehicle as well as the wind tunnel.
    水洞像风洞一样,是流体力学基本研究的主要工具。
  30. When their tangential speeds are equality, then it comes to the no-slip boundary condition as the conventional hydromechanics.
    流体流动和表面的切向速度相等时即为常规流体力学中常采用的无滑移边界条件。