hydroforming
英
美
n. 液压成形法；临氢重整的（指汽油等）；液压橡皮模成形
adj. 临氢重整的
双语例句
- Study on the Formability of a Tube in Hydroforming under Linear Loading Paths
线性加载路径下管材液压胀形性能的研究 - Tailor-welded tubes ( TWTs) are more and more used in tube hydroforming due to its low cost, high productivity, high quality and varieties in products.
焊缝管由于生产成本低、生产效率高、品种多和质量高等优势，在液压成形中的应用愈来愈多。 - With superior control over forces and motions, Interlaken's Hydroforming Press provides a greater overall quality of formed parts.
随着对力和运动控制优势，因特拉肯的内高压成形媒体提供了更大的组成部分的整体素质。 - Hydroforming& Warm FormingInterlaken's Hydroforming Press Systems are for use in production or process development applications.
内高压成形及热成型因特拉肯的内高压成形压机系统是在生产或工艺开发应用。 - Tube Hydroforming Technology and its Application to Vehicle Lightweighting
内高压成形工艺及其在汽车轻量化中的应用 - In order to solve the crack problem of curved hollow components during hydroforming, a front chassis frame was taken as an example and the effect of three bending angles of0.
针对弯曲轴线矩形截面件内高压成形时容易发生开裂的问题，以轿车底盘前梁为例，采用数值模拟和试验的方法分别研究了0。 - The simulation and test analysis show that advantages and disadvantages of the matching correlation between internal pressure loading and axial feeding is critical in components hydroforming;
仿真与试验分析表明，内压加载和轴向进给匹配关系的优劣是零件液压成型的关键； - Finite Element Simulation and Analysis of Thin-walled Tube Hydroforming
薄壁管液压成形计算与有限元模拟分析 - Firstly, advantages, application status and technological traits of tube hydroforming technology are introduced in this paper, and FEM models of instrument panel beam hydroforming are built.
介绍了液压成型技术的优点、现状及其工艺特点，以某汽车仪表板梁液压成型为例建立了有限元模型。 - Current situation and development of green energy efficiency technology& hydroforming
绿色节能制造技术&液压成形研究现状及发展 - Hydroforming is a flexible processing technique using hydraulic pressure as the forming media.
液压成形是依靠高压液体使金属坯料贴模成形的柔性加工工艺。 - Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。 - Sheet metal hydroforming is advanced technology and is developed and applied in recent years.
与传统板材成形相比，板材液压成形技术的工艺难度大，设备结构复杂。 - X-joint Tube Hydroforming Processing Analysis Based on FEA An Investigation on One-step and Two-steps Tube Hydroforming ( THF) Using Finite Element Method
基于有限元仿真的四通管内高压成形工艺分析管件内高压单步成形和两步成形法数值仿真研究 - Applications of Finite Element Simulation in Tube Hydroforming
有限元模拟技术在管件液压成形中的应用 - Tube hydroforming ( THF) is an advanced process of forming closed-section, hollow parts with different cross sections by applying an internal hydraulic pressure and additional axial compressive loads.
管材内高压成形作为一种制造空心轻体构件的先进制造技术，近年来发展迅速，目前已成为塑性加工领域中一个热点研究方向。 - Monitor System of Sheet Metal Hydroforming Based on Configuration Software
基于组态软件的板材液压成形监控系统 - Investigation of Hydroforming Thin-walled Y-shaped Three-way Tubes and Effects of Axial Feed Ratio
薄壁Y型三通管内高压成形及补料比的影响 - Optimization for hydroforming loading paths of T-shaped tube based on grey system theory
基于灰色理论的T形管内高压成形加载路径优化 - Fuzzy logical controlled loading path optimization for T-shaped tube hydroforming
三通管液压成形加载路径模糊控制优化 - Simulation of Drawing Process of Hydroforming Ladder Cylinder Part
基于Dynaform的阶梯形件液压拉深成形仿真技术研究 - Research on hydroforming of thin-walled stainless steel digital camera cover oval shape case
薄壁不锈钢数码相机外壳液压成形工艺研究卵形壳，蛋形表壳 - Finite Element Analysis of Distortional Buckling of Cold-formed Thin-walled Lipped Channel Beam-column; Effect of bending angle on hydroforming of curved hollow components
冷弯薄壁卷边槽钢压弯构件畸变屈曲有限元模拟弯曲角度对弯曲轴线件内高压成形的影响分析 - The hydroforming process is very repeatable.
内高压成形过程是很重复。 - Influence of loading paths on hydroforming process of stainless steel spherical part
加载路径对不锈钢球形件内高压成形过程影响 - Finite element model including the weld and the HAZs of the welded tube in hydroforming is made by slicing the HAZ into strips with various flow stresses.
通过对热影响区进行分片的方式，建立了包含焊缝和热影响区的焊缝管液压胀形的有限元模拟模型。 - Numerical Simulation and Optimization of Unsymmetrical Y-shaped Tube in Hydroforming Process
非对称Y型三通管内高压成形过程数值模拟及参数优化 - The hydroforming of Abnormity Tube can carry through in common hydraulic press or special hydroforming press.
异形管件液压胀形可以在普通液压机或专用液压胀形压力机上配以专用模具装置完成。 - The technology of tube hydroforming and sheet metal hydraulic drawing is rapid developed in recent decades.
管材液压胀形、板材液压拉深是近几十年来迅速发展起来的新技术。 - The study lays an important foundation for the succeeding multi-parameter experiment design and the study of the hydroforming process.
本论文的研究对于后续的多参数试验设计和全面分析充液拉深过程奠定了基础。