duralumin

1. Defend jamming, the duralumin housing body has very strong defend jam of action, make system firm run-time.
   防干扰，铝合金壳体具有很强的防干扰作用，使系统可靠运行。
2. A Study on Production Processes and Properties of Copper Alloys with High Strength and High Conductivity; Nippon duralumin
   高强高导铜合金的生产工艺及性能研究日本高强度铝铜镁合金
3. Study on Weld Shape in Electron Beam Welding of High Strength Aluminum Alloy; Nippon duralumin
   高强铝合金电子束焊接焊缝成形质量研究日本高强度铝铜镁合金
4. Nippon duralumin Preparation and Relative Basic Research on the Copper Alloy with High Strength and High Conductivity
   日本高强度铝铜镁合金高强导电铜合金制备及其相关基础研究
5. LY12 duralumin was heat treated on a trial basis and the variation of microstructure and mechanical properties with heat treatment process was obtained.
   对LY12硬铝合金进行了热处理工艺试验，获得了该合金热处理工艺与力学性能之间的关系。
6. Nippon duralumin typewriter alloy
   日本高强度铝铜镁合金
7. Nippon duralumin plastic metal bearing alloys
   日本高强度铝铜镁合金塑性高锡青铜轴承合金
8. Nippon duralumin magnesium-aluminium-zinc alloys, unwrought
   日本高强度铝铜镁合金镁铝锌合金，未锻造
9. Microstructure and Mechanical Properties of High-Performance of Extruded Mg-Al-Ni Alloys; Nippon duralumin
   挤压变形高性能镁铝镍合金的显微组织和力学性能日本高强度铝铜镁合金
10. Etching methods and techniques of duralumin alloy
    硬铝合金的侵蚀方法及技巧
11. Low-cycle impact fatigue behaviours of aluminium and duralumin
    纯铝和铝合金的低周冲击疲劳行为
12. Turn-milling machining technology for miniature spindles of duralumin alloy
    车铣加工硬铝合金微细轴技术
13. This paper mainly discusses the design and development of the intelligent controlling system that is used in screw tightening. Introduction to construction method of fastening bolt on the lap surface of duralumin busbar
    介绍了电动螺栓紧固机-单片机控制装置的开发与设计。硬铝母线搭接面螺栓紧固的施工方法探讨
14. The test shows that turning technology is a valid method for machining micro-shafts of duralumin alloy, but some few problems need furthering investigation.
    试验结果表明，应用车削技术加工硬铝材料的微小型轴类零件是一种有效的办法，但还有一些问题值得研究。
15. The Cold Extrusion Process for the LY 12 Duralumin Brackets and Design of the Die
    LY12硬铝支架冷挤压工艺及模具设计
16. Study on the Adhesive Technology of Duralumin/ ZN-1 Damping Materials Composite Structure
    铝/ZN-1阻尼材料复合结构件的粘接技术研究
17. Effect of the factors such as surface treatment of ZN-1 damping materials, the time of dipping in oil of vitriol, neutralizing agent of acid method and storage time of adhesion samples on the adhesion performance between ZN-1 damping materials and duralumin is investigated.
    研究了不同表面处理方式、酸处理时间、酸处理中和剂及试件贮存时间等因素对ZN-1阻尼材料与硬铝的粘接性能的影响。
18. Introduction to construction method of fastening bolt on the lap surface of duralumin busbar
    硬铝母线搭接面螺栓紧固的施工方法探讨
19. Cold Extrusion and Precision Extrusion Forming Technology for Duralumin Drive Wheel
    硬铝主动轮冷挤压及精推挤成形工艺
20. Quality problems paid attention in installing of duralumin push-pull windows
    铝合金推拉窗安装质量中必须重视的问题
21. If the duralumin plate surface is treated by chromate anodization, both epoxy adhesives can provide excellent adhesive performance.
    当硬铝板表面采用铬酸阳极化处理时，两种胶黏剂均能获得优异的粘接效果。
22. Panoramic analysis of impurity contents in diatomite, duralumin, stainless steel, copper and nickel
    硅藻土，硬铝，不锈钢，金属铜和镍中杂质含量的全分析
23. The Explosion Welding and Rolling of Copper and Duralumin ( LY 12) clad Plate
    铜&硬铝（LY12）复合板的爆炸焊接与轧制
24. A study has been made of low-cycle impact fatigue behaviours of aluminium and duralumin including cyclic stress-strain behaviour, cyclic hardening ( softening) and fatigue life.
    报导工业纯铝和硬铝在常规低周疲劳和低周冲击疲劳载荷下的力学行为，包括应力应变回线、循环硬（软）化及疲劳寿命等。

noun

1. an aluminum-based alloy