dip-coating

英 [dɪp ˈkəʊtɪŋ] 美 [dɪp ˈkoʊtɪŋ]

n.  浸涂

化学



双语例句

  1. Effect of Reduction Methods on Ag/ AgX Reference Electrodes Prepared by Thermal Dip-coating Method
    还原方法对热浸涂银/卤化银参比电极的影响
  2. Coated fabric: fabric by dip-coating made of PVC or other plastic processing of products.
    涂塑布:织物经浸涂聚氯乙烯或其他塑料加工而成的制品。
  3. Indium tin oxide ( ITO) conductive and transparent film is prepared on quartz glass matrix from In ( NO_3) and acetylacetone by sol-gel dip-coating technique with anhydrous SnCl_4 as the dopant.
    以五水硝酸铟和乙酰丙酮为原料,以无水氯化锡为掺杂剂,采用溶胶凝胶工艺,用提拉法在石英玻璃基体上制备了ITO透明导电薄膜。
  4. The Ce-Zr mixed oxides were synthesized by co-precipitation method, and the cordierite ceramic honeycomb as the catalyst support, the catalyst was prepared by dip-coating method, the activity of the catalyst was studied.
    采用共沉淀方法制备了Ce-Zr复合氧化物,以堇青石陶瓷蜂窝作为载体,运用浸渍-涂附技术制备了催化剂,并利用苯系气体作为原料气,对催化剂进行了性能评价。
  5. Homogeneous and transparent nano-TiO2 films doped with WO3+ were prepared on glass substrates by sol-gel processing and dip-coating technique.
    用溶胶-凝胶法和浸渍-提拉工艺在载波片上制备了均匀、透明的WO3+掺杂的纳米TiO2薄膜。
  6. In this paper, the CeO 2-ZrO 2 composite oxide with different composition was prepared by dip-coating method. Meanwhile, the crystalline phase structure, reduction performance, surface area and thermostability of the oxide were characterized by using XRD, H 2-TPR and BET.
    用浸渍法制备了不同比例的CeO2ZrO2复合氧化物,并用XRD,H2TPR和BET等研究了复合氧化物的晶相、还原性能及热稳定性。
  7. The porous TiO2 thin films deposited on the surface of common glass surface were prepared from alkoxide solutions containing polyethylene glycol ( PEG) by dip-coating technique.
    配制了含不同分子量聚乙二醇的TiO2溶胶,采用浸渍提拉法在普通载玻片上制备了单、双层多孔TiO2薄膜。
  8. Titania films were prepared by the sol-gel dip-coating method, with polyethylene glycol ( PEG) and hydroxypropylcellulose ( HPC) used as the additives.
    用溶胶凝胶浸渍-提拉法制备样品,以聚乙二醇(PEG)和羟基纤维素(HPC)作为添加剂,来改变样品的微观结构。
  9. A study on gas sensitivity of WO_3 films prepared by dip-coating method
    浸渍-提拉法制备WO3薄膜的气敏性能研究
  10. After we got the high quality of alumina sol which is suitable for coating inside the fiber, the technics were also studied in the fabrication of alumina film by dip-coating method and rising liquid method.
    在制备出性能优良、适合与光纤内壁镀膜的氧化铝溶胶后,同时还研究了提拉法和液面上升法镀膜中工艺参数对制备氧化铝膜的影响。
  11. Transparent SnO 2 sols were obtained by a sol-gel method from SnCl 2 · 2H 2O in absolute ethanol, and SnO 2 thin films were prepared by dip-coating technique.
    以SnCl2·2H2O和无水乙醇为原料,采用溶胶凝胶方法制备了SnO2透明溶胶,通过浸渍提拉技术制备了SnO2纳米薄膜;
  12. Preparation of Sb-Doped SnO_2. Transparent Conductive Film by Dip-Coating Method
    浸涂法制备掺锑SnO2透明导电膜
  13. Gas sensitivity film is prepared in vacuum sputter coating 、 dip-coating and smearing film techniques.
    采用真空镀膜、拉膜和涂膜技术制备气敏薄膜;
  14. A film of pure titanium dioxide or Fe 3+ doped titanium dioxide was coated on soda-lime glass by sol-gel and dip-coating methods and then a kind of photocatalytic self-cleaning glass was prepared after it was calcined.
    采用溶胶-凝胶法和浸渍提拉法在普通钠钙玻璃表面负载了一层纯TiO2膜或掺杂不同量的Fe3+的TiO2膜,经灼烧后制备了具有自洁功能的新型玻璃。
  15. The composition and catalysis condition of the sols and dip-coating process have been found to have significant influence on the transmittance of the glasses with the antireflection coating.
    研究表明,不同的提拉速度、溶胶催化条件和陈化时间对涂覆有减反射薄膜的玻璃透过率有很大的影响。
  16. TiO 2 and Pt/ TiO 2 antibacterial thin films were prepared by sol-gel process and dip-coating method on the substrate of ordinary glazed ceramic plate.
    以普通釉面陶瓷作为基体,采用溶胶-凝胶方法和浸渍提拉技术制备TiO2和Pt/TiO2抗菌薄膜。
  17. The TiO_2 sol was made by the reverse micelle method and the TiO_2 films were fabricated by dip-coating methods under different operating conditions. The thickness and the bandgap of TiO_2 nano films were calculated by using the UV-VIS spectra of the films.
    采用反胶束法制备TiO2纳米溶胶,利用浸渍提拉方法制备TiO2薄膜,通过对膜进行紫外可见光谱分析,探讨了影响TiO2纳米膜厚度和禁带宽的各种因素。
  18. A dip-coating method was employed to prepare metal monolithic catalyst for catalytic combustion of methane.
    采用浸涂方法制备了甲烷催化燃烧用金属催化剂整体化反应器。
  19. The parameters for waveguide thin film of zinc sulfide prepared on a substrate of F1 glass by the vacuum evaporation and epoxy resin prepared on a substrate of K9 glass by a dip-coating were measured.
    我们对在F1玻璃衬底上真空蒸发制作的硫化锌薄膜和在K9玻璃衬底上浸涂法制作的环氧树脂薄膜的参数进行了测量。
  20. This paper studied the preparation of composite microfiltration membrane with 20% zirconia mass content, and systemically studied some factors which influenced the composite membrane preparation, such as the support, dip-coating time, sintering program and so on.
    用固态粒子烧结法制备了氧化锆含量为20%的Al2O3-ZrO2复合陶瓷微滤膜,系统地研究了支撑体、浸浆时间以及烧结制度等因素对复合膜制备的影响。
  21. TiO2/ SnO2 composite film prepared by the sol-gel method was deposited on a slide glass substrate by dip-coating method at low temperature.
    采用溶胶-凝胶法常温合成含有一定晶型的TiO2溶胶和SnO2溶胶,使用浸渍提拉法在普通载玻片上制备出TiO2/SnO2复合膜。
  22. The experimental results show as follows: 1, The sol-gel method and dip-coating process were the good methods for preparing nanometer Ag-TiO2 photocatalytic thin film.
    研究结果如下:1,凝胶-溶胶法和浸渍-提拉法是一种很好的制备Ag-TiO2膜光催化剂的方法,制备时必须注意控制实验条件。
  23. Composite of polyaniline and polyvinyl alcohol was obtained by solution blending. SAW-impedance type humidity sensors based on the composite were constructed by dip-coating.
    采用溶液共混制备了聚苯胺和聚乙烯醇复合湿敏材料,通过浸涂法制备声表面波-阻抗型湿敏元件。
  24. In this case, ITO precursor slurries were prepared by organic and inorganic sol-gel methods using metal indium and tin salt as raw materials. A dip-coating process was performed to deposit ITO precursor slurry on the substrate.
    本文以锡的无机盐和金属铟为原料,分别通过有机法和无机法制备出ITO前驱物浆料,采用浸渍提拉法在玻璃基片上涂覆薄膜并经过热处理得到ITO薄膜样品。
  25. In this paper, TiO2 films were synthesized by dip-coating technique on glass slides with a self-made tiras machine, on the basis of the nonionic surfactant template theory and sol-gel theory.
    本论文以非离子型表面活性剂模板理论及溶胶-凝胶理论为基础,利用自制的提拉机,通过浸渍-提拉的方法于载玻片上制备TiO2薄膜。
  26. The CNTs were modified with hydroxylamine hydrochloride salt and formed composites with PMMA. Gas sensors based on the composites were prepared by the method of dip-coating.
    在此基础上,采用盐酸羟胺盐对其进行修饰,并与PMMA复合,以浸涂法制备气敏元件。
  27. In this paper, I have completed my research in the following areas: 1. TiO2 thin film electrodes were prepared by dip-coating technique. Using the porous nickel based TiO2 thin film electrode was used as working electrode. 2.
    本文主要开展了下面以下几个方面的工作:1.采用浸渍提拉法制备发泡镍载二氧化钛薄膜电极,并以其为工作电极。
  28. In this paper, nanometer Ag-TiO2 film was prepared by sol-gel method and dip-coating process. The Ag-TiO2 film photocatalyst was characterized by XRD 、 DRS 、 SEM and AFM.
    本文采用凝胶&溶胶法和浸渍-提拉法制备了负载Ag的TiO2膜,借助XRD,DRS,SEM和AFM等测试手段对制备的纳米Ag-TiO2膜进行了表征。
  29. Impedance-type humidity sensors based on the composites were fabricated by dip-coating.
    通过浸涂法制备电阻型湿敏元件。
  30. Second, with the dip-coating method, the hollow fiber composite membrane has been prepared using chitosan as the coating material.
    其次选用壳聚糖为涂覆材料,采用浸渍涂覆法制备了壳聚糖(CS)/聚砜中空纤维复合膜。