degasser
英 [dɪˈgæsə]
美 [ˈdeɪgəsər]
n. 脱气装置；除气器（剂）
双语例句
- Three-Dimensional Numerical Simulation of Coalescence and Removal of Inclusions in RH Degasser
RH装置内夹杂物聚合与去除的三维数值模拟 - The effect of hexachloroethane degasser pretreatment on porosity formation in ultrasonic ingot is investigated.
研究六氯乙烷脱气剂对超声波处理铸锭内气孔的影响。 - In this study, the effect of ultrasonic treatment time on crystallization structure of industry pure aluminum ingots was investigated. e.g.: with degasser and ultrasonic.
前言：研究了超声波处理时间对工业纯铝铸锭结晶组织的影响，即添加除气剂又进行超声波处理的情况。 - A stepwise degasser unit shall be developed as part of the design.
作为设计内容，应开发阶梯式脱气装置。 - Effect of Different Technological Factors on Inclusion Removal in RH Degasser
不同工艺因素对RH精炼夹杂物去除过程的影响 - Abstract: On the base of flow field in RH degasser, a three dimensional mathematical model was developed to study the coalescence and removal of inclusions.
摘要：基于RH精炼装置内流场，建立了一个研究夹杂物聚合与去除行为的三维数学模型。 - The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser.
采用数值模拟方法分析了不同工艺因素对RH精炼中夹杂物去除过程的影响。 - Analysis of and Countermeasure to the Safety of Degasser Silo of High-pressure Polyethylene Plant
高压聚乙烯脱气料仓安全性分析和安全对策 - Study on Deoxygenation and Inclusion Removal of Bearing Steel in RH Degasser
RH工艺生产轴承钢脱氧和去除夹杂物研究 - The effects of treatment time, lift gas flowrate and liquid height in vacuum vessel on inclusion removal in RH degasser were investigated by choosing emulsion drops simulated as inclusions in a water model.
通过选择乳状液滴模拟夹杂物和RH装置内水模实验，考察了RH处理时间、提升气量、真空室内液面高度对夹杂物去除行为的影响规律。 - Model LZCQ/ 3 Centrifugal vacuum degasser
LZCQ／3离心式真空除气器 - On CD 800 Centrifugal Degasser The authors describe the structures, mechanism and charac-ters of CD 800 centrifugal degasser and explain its design, application and degassing function.
作者介绍了CD&800离心式除气器的结构、原理及特点，对其除气机理进行了探讨分析，并对其设计与使用作了简要说明。 - Vacuum degassing process in RH degasser was modeled with CO 2 desorption from NaOH-CO 2 solution in a physical model. The effects of operation parameters on degassing reaction were investigated by monitoring CO 2 desorption from NaOH-CO 2 solution.
利用RH物理模型进行了CO2从NaOH-CO2体系中释放动力学的研究，考察了操作参数对RH脱碳和脱气反应的影响。 - Mixing and circulating of molten steel of circulating vacuum degasser
环流式真空脱气装置的钢水混合与循环 - Decarbonization reaction rate of circulating vacuum degasser
环流式真空脱气装置的脱碳反应速率 - The principles of operation and characteristics of the vaccum degasser and some common gasbleeding patterns were discussed.
本文对真空除氧器的工作原理及特点作了系统介绍。 - The Effect Comparision Of AVMS With Electric Gas Degasser
自动真空蒸馏脱气器AVMS和电动脱气器效果比较 - The degasification mechanism of a vacuum drilling fluid degasser, the matching of the vacuum pump with sewage pump and the selection of various parameters are discussed.
论述了真空式除气器的除气机理及设计真空式除气器时真空泵、污水泵的匹配和各种参数的选择。 - Based on the flowing character of catalyst in stand pipe and degasser, generation reason of flue gas entrained by regenerated catalyst and principle of degassing process in the process of FCC was analyzed.
根据催化剂在输送立管和脱气罐内的流动特点，分析了催化裂化过程中再生催化剂产生携带烟气的原因和脱气的原理。 - It is not necessary to add vacuum degasser to produce sheet with DQ grade.
⑨生产DQ级薄板不需要配置真空脱气； - The properties and features of 100t vacuum degasser
100吨钢液真空脱气装置的性能和特点 - Study on Reaction Mechanism of Degasser "NaNO_3+ C ( graphite)+ Carrier" in Aluminum Alloy Melt
精炼剂NaNO3+C（石墨）+载体在铝合金液中反应原理的研究 - The authors recommended an advanced, practical and high accuracy CO_2 mud logging instrument, put forward the selecting condition for the degasser, and analyzed the factors of influencing the well-site CO_2 detection.
同时推荐了一种先进、实用、检测精度高的CO2录井仪器，提出了脱气器的选择条件，对影响现场CO2检测的因素进行了分析。 - The optimum performance of a vacuum degasser not only depends on the proper matching of the vacuum pump with sewage pump, but also on the holding capacity of the disposal tank and the location of the degasser in the solid-control system.
真空式除气器性能的好坏不仅取决于真空泵、污水泵在整机中是否匹配得合理，还与处理罐的容积及除气器在固控系统中的安装空间等因素有关。 - The kinetics experiments for steel denitrogenation in vacuum degasser have been carried out with 40 kg vacuum induction furnace and such processes as vacuum carbon oxygen reaction, surface active element control and molten slag are studied respectively.
在40kg真空感应炉上进行了真空下钢液脱氮工艺的实验研究。实验考察了真空下碳氧反应工艺、表面活性元素控制和脱氮渣系等因素对钢液脱氮动力学的影响。